How To Fix A Broken Bed Frame The Two Best Methods

Whether you’re moving or just rearranging your furniture, (bad) things can happen, and you may end up with a cracked bed frame. It’s instead demanding and probably the last thing you wish after a long day. But when I simply described your present situation, don’t fear — today, I’ll explain the way to fix a broken mattress frame.

Trust me — I know the struggle. You probably spent hundreds of greenbacks on your amazing mattress that matches your other fixtures perfectly, even that awkward rug your grandma talented you. Yet, it in simple terms took one incorrect circulate to interrupt the frame. It’s sad, no doubt, however it happens.

Unfortunately, despite if your bed is from IKEA or a higher-quality furnishings store, poorly assembled beds aren’t that infrequent nowadays. Brands are using the cheapest materials they can uncover to cut corners and make you buy more furniture. That’s just the manner the industry works (not that it justifies their choices).

Don’t lose hope, though; all isn’t lost. The following tips ought to show you how to repair a damaged mattress body soon and devoid of a lot hassle.

Disclaimer: You don’t have to be an experienced craftsman to finish this project. Anyone can do it; just follow my steps.

Addressing the Issue

The con of having a wooden bed frame is that it’s at risk of cracking. Cracks and splits usually grow due to the enormously poor quality of wood used for such a lot commercially available beds.

However, in latest years, the tendency of utilizing reasonably-priced substances has come to be famous among “prestigious” manufacturers too. Thus, the hot “normal” is to spend upwards of $2000 for a “high-end” mattress every 5 years.

Obviously, that’s a big waste of money, particularly when it’s so easy to fix what’s broken. So, listed below are two approaches you may fix the cracks.

Method #1: Reinforcing the Mattress Frame

For this method, you’ll merely want a few extra portions of lumber and screws. A drill can also come in handy; whether you don’t get to use it for this project, it’s a tool everyone should have at home.

Here are the steps you wish to take:

1. Strip Your Bed

First, you desire to remove the bed as well as the field spring a good way to paintings comfortably. Go away the slats, however. You need the bottom there so that you can support it with the extra lumber bars.

2. Reduce the Lumber

Depending on the damage, you could have to toughen the entire frame with extra portions of lumber. I’d imply doing that no matter if just one bar has a crack. Besides, if you’re at the factor of desiring to repair your frame, there is probably extra to be repaired.

Reinforcing the frame is incredibly easy; you just have to cut the recent pieces of lumber to the correct size and location them on top of the cracked preexisting bars.

It’s significant to apply the exact same width lumber that was initially used. Thickness might range a touch, though, in case you can’t uncover an exact counterpart.

Measure and mark the pieces of wood and pass external to cut them. You’ll need a circular noticed for that.

A hand saw would do the task too if you don’t have a circular one, and you’re on a decent budget. However, I’d recommend you to only invest in an electrical noticed because it’s going to save you so much time and effort. On correct of that, if you prefer a well one, it’ll perhaps be a one-time purchase, so it’s worth it.

3. Upload the Portions of Wood

Once you’ve reduce the bars to the right length, go back within and begin placing them on right of the cracked parts.

Again, it’s a good suggestion to reinforce the whole bed frame (including the slats). Be smart and save yourself the effort of doing this again within the future.

Add the center bar right on right of the historic one and attach it with a couple of screws. After every thing is installed, you’ll put more screws in each bar.

Once you’ve done that, get longer screws and drive them into the intersections in which the center bar overlaps with any other slats. You would like a protracted sufficient screw which could suffer all the wooden for additional support. Shorter screws move in between the longer ones.

Addressing a Break on a Side Bar

If the spoil is on among the side bars that shape the perimeter of the frame, move about fixing it an identical manner as you will the middle bar.

Here you’ll detect that the new piece of wood won’t desire to stay straight; it’s going to curve somewhat towards the within of the frame. Don’t worry — once you’ve placed the first screws in, it’ll be simple to drag it back.

Once you have about four screws in there (depending on the bed, the range may vary), you’ll need to pull the bar straight.

Pro tip: Get three screws (for a queen-size bed) and simply begin them (don’t screw them all of the manner in). Do that so that you don’t have to hold the bar for long. Plus, it’s smarter than having to tug with one hand, and putting the screw and attempting to force it in with the other.

Next, lightly pull the bar back; you’ll observe that you’re stretching the entire frame. Due to the previous step, you have already got the screws in location — now simply force them in. Do it quickly, and try to get all 3 in there in order that you don’t lose the strength.

Again, based at the length of the bed, the variety of screws will vary.

4. Red meat It All Up

The last thing you want is to return to square one in a year’s time. That’s why while you’ve received everything in place, you’ll want to force extra screws round to safe the stuff you’ve fixed.

That might ensure that the hot production is robust enough not to fall apart. If you’ve performed a good job, don’t expect that you’ll be running to the store for a brand new bed any time soon.

Method #2: Handling Cracks

If you’re dealing with a crack, you may use wood glue to fix it. I’d individually go with the first method, but depending at the situation and the materials you have, the second probably a more sensible choice for you. Here are the steps:

1. Prep the Crack

Depending on the length of the crack, you would possibly have to insert a screwdriver (or the other instrument with a comparable shape) into it and open it slightly. The point is so as to clean out the splinters and different particles so that the glue can create a much better bond. You may use an X-Acto knife for that, yet keep in mind to be incredibly careful with it.

2. Upload Glue

Now that you’ve prepped the crack, inject the glue alongside its length. Using a small-tip bottle will make it easier because it provides more precision. Then, take a putty knife or even out the glue.

If you don’t have a putty knife, you could use an historical X-Acto knife or even a hard piece of cardstock — anything which may smear the glue with out leaving you with a multitude to clean.

Make certain the glue has saturated the inside of the crack. Repeat an analogous steps for all cracks at the bed frame.

3. Upload Clamps

The subsequent step will be to place bar clamps all around the frame. Tighten them till you can see the glue oozing out, but don’t go overboard — you don’t want to upload more harm to the frame, especially if the bed is old.

An alternative would be to use C-clamps, yet they don’t provide as a lot strength as bar clamps. On the end of the day, use what you have — this project’s target isn’t to go away you broke!

Leave the clamps on overnight. You need to make sure that the glue is wholly dry. Still, while waiting, you would possibly desire to look into the body for extra cracks. If you spot anything you’ve missed, now is the time to the touch it up.

4. Toughen the Joint

Once the glue is totally dry, you could make stronger the joint. For this, you’ll have got to measure the length of the crack and add about six to eight inches to it. Then, measure the width of the bed frame.

Once you have the measurements, cut a strip of half-inch plywood. Again, if you’re on a good budget, don’t be too picky approximately it — almost any form of scrap wooden you have will do. Just make sure it’s not rotten or damaged, and that it’s around the recommended size.

5. Drill Holes

You’ll need to pre-drill the plywood with a 3/16-inch bit. Location the holes about two inches apart, yet don’t fear too much approximately how they’re arranged. They don’t have got to line up at all.

6. Glue and Screw

Now that you’ve prepped everything, apply glue to the plywood after which cautiously situation it over the crack. Using the pilot (pre-drilled) holes, force in one-inch screws.

Leave the frame to dry overnight. Once it’s dry, your bed is ready to use!

Disclaimer: This system is generally applicable whilst handling minor damage. If there are more than two damaged places or cracks, stick to the first one. After all, as you could probably tell, it does take more time.

Still, if you can’t uncover bars the same width as yours (or any bars at all) and merely have entry to plywood and glue, with the aid of all means, opt for the second method.

The Takeaway

If you have been wondering a way to repair a damaged mattress frame and avert splurging on a new one, now you have two simple yet effective solutions.

You don’t have got to get rid of the bed if whatever breaks. Nine out of ten times, you can repair it yourself. And once you’ve finished a couple of projects, you’ll get the dangle of it. Earlier than you understand it, you’ll be looking for different matters to repair.

So, don’t shy far from demanding situations due to the fact that’s what the big brands want. If I can do it, you can too. Knowing the way to fix a damaged bed frame is proof that you don’t have got to depend upon stores for everything. Remember — with enough ambition, anything is possible!