What is Concrete Yardage?
Concrete yardage is the measurement used to determine the amount of concrete required for a project. It is calculated in cubic yards, which is the volume of a cube that is one yard wide, one yard long, and one yard high. To figure concrete yardage, you need to know the dimensions of the area you want to pour concrete.
What Do You Need to Figure Concrete Yardage?
To figure concrete yardage, you need to know the length, width, and depth of the area in feet. You will also need a calculator, a pencil, and paper to record your calculations.
Steps to Figure Concrete Yardage
1. Measure the length, width, and depth of the area in feet. Write down the measurements. 2. Convert the measurements to yards. Divide each measurement by three since there are three feet in a yard. Round up to the nearest whole number for accuracy. 3. Multiply the three measurements together to get the total cubic yards needed. 4. Add 10% to your total to account for any variations in the depth of the area, waste, or spillage. 5. Round up to the nearest whole number to determine the total cubic yards of concrete needed for the project. 6. Order the correct amount of concrete from your supplier based on your calculations.
Frequently Asked Questions about How to Figure Concrete Yardage
Q: How do I measure the depth of the area?
A: Use a tape measure to measure the distance from the top of the area to the bottom. Record the measurement in feet.
Q: What if the area I want to pour concrete is not a perfect rectangle?
A: Divide the area into smaller rectangles and calculate the concrete yardage for each one. Add the totals together to get the total concrete yardage for the entire area.
Q: What if I don’t add 10% to my total cubic yards?
A: You may run out of concrete before the project is complete, which can be costly and time-consuming to fix.
Conclusion
Calculating concrete yardage is an essential part of any construction project. By following these simple steps, you can figure concrete yardage with ease, ensuring that you order the correct amount of concrete needed for your project. Remember to double-check your calculations and always add 10% to your total to account for any variations.